辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

Comparison between discrete and continuous analysis of facial expressions,elicited by bitter-tasting beverages in overweight and healthy-weight individuals

The aim of the present study was to compare the information provided by a discrete and continuous data analysis of two emotions (disgust and joy), elicited by bitter-tasting beverages (coffee, yerba mate infusion and grapefruit juice) in two groups with different body mass index (BMI): overweight group (25 < BMI < 30), and healthy-weight control group (18.5 < BMI ≤ 25). Participants (n = 66; 34 females, 32 males) evaluated a total of three consecutive sips of the same beverage (taking one sip every 20 s and registering a continuous video for 60 s). The Wilcoxon test (continuous analysis) showed some changes generated as the drinks were being consumed. The biggest difference was the expression of disgust for coffee in the high BMI group, at the first sip (0–10 s). It represented 27% compared to 2% in normal BMI. The continuous analysis allowed to observe the periods where the differences were greater (0–10 and 40–50 s).     

王庄煤矿卡轨车系统应用设计

本文基于王庄煤矿运输大巷实现连续运输要求,对运输大巷卡轨车系统进行了设计,并对巷道条件及卡轨车运输效果等进行了分析。     

芳烃连续重整装置先进控制系统的开发和应用

针对某石化公司芳烃连续重整装置的生产现状、存在问题及需求,为实现节能降耗而进行控制优化,在常规DCS控制的基础上提出了芳烃连续重整装置先进控制系统的控制目标、控制策略、系统结构及控制方案。利用机理建模,单值预估控制来进行先进控制器搭建,应用结果证实了所开发系统实现了质量指标的卡边控制,降低了能耗,提升了装置的平稳性。     

“都林”机器人内板连续式喷涂技术应用浅析

结合新工厂的应用经验,通过对"都林"机器人的喷涂方式、布局、雾化器配置选型、参数设置、仿形设计及品质控制要点等方面的分析,总结了连续式喷涂的优势及技术控制要求。     

改良森吉米尔法退火炉中带钢的氧化研究

总结了带钢经过改良森吉米尔退火炉后的4种氧化状态,通过现场实际生产经验的总结和数据积累,分析了带钢产生表面氧化的关键因素,指出了实际操作中应该注意的事项,为以后的设计调试及生产提供了参考。     

Decomposition of first-order hybrid Petri nets for hierarchical control of manufacturing systems

Although hybrid Petri net (HPN) is a popular formalism in modelling hybrid production systems, the HPN model of large scale systems gets substantially complicated for analysis and control due to large dimensionality of such systems. To overcome this problem, a typical approach is to decompose the net into subnets and then control the plant through hierarchical or decentralized structures. Although this concept has been widely discussed in the literature for discrete PNs, there is a lack of research for HPNs. In this paper, a new method of decomposition of first-order hybrid Petri nets (FOHPNs) is proposed first and then the hierarchical control of the subnets through a coordinator is introduced. The advantage of using the proposed approach is validated by an existing example. A sugar milling case study is analysed by using a decomposed FOHPN model and the optimization results are compared against the results of the approaches presented in other papers. Simulation results show not only an improvement in production rate, but also show the ability to control the plant online. In addition, by using the hierarchical control structure for an FOHPN model, it is possible to reduce the cost of communication links, improve the reliability of the system, maintain the plant locally, and partially redesign the system.